Specification

Gas Type
All of the Hunter and HS Gas Stoves for conventional installation are suitable for both Natural Gas and LPG.

Control
All the Hunter and HS Gas stoves are supplied with a top quality manual control as standard. However, for added convenience, a hand-held full remote control is available as an optional extra on all the stoves except the Hawk. The remote control handset can switch the stove on from a permanent pilot, and off, and adjust the flame picture. Should the need arise a manual override ensures continued operation of the stove.

Choices, choices
There are many options for styling within the Hunter HS Gas range to allow you get your stove just the way you want it.

Heat Outputs
For maximum heat outputs click here. Minimum output is calculated at 70% of the maximum output.

Installation
All of the Hunter Gas stoves are suitable for installation to a standard solid fuel Class 1 flue and a Class 2 flue. Depending on the situation, the stoves may be either rear flued or flued from the top of the stove.

Please see each individual product range for the specific door, canopy and fuel options available or refer to the technical key.

Fuel Type
All of the Hunter and HS Gas stoves offer an exceptionally realistic fuel bed, either a random coal or log effect. It is also possible, even after installation, to change your chosen fuel bed. Whilst the stove remains in situ, a change can be made from coal to wood or vice versa should you desire. (See note *)

Safety Features
For that extra peace of mind, each stove features an oxy pilot to safely monitor the oxygen level in the room; should this fall below an acceptable level the stove turns itself off. Likewise with the flame failure device, this safely cuts off the gas supply should the flame be extinguished

Optional Extras
As an optional extra it is possible to have any of the stoves with brass door knobs, either single, double or as a set, depending on model.

All of the stoves are available in a midnight black finish except the Verona, which also has a brushed stainless steel finish.

* Fuel effect can only be changed by a registered engineer